5100E and 5090E ROPS PFM and Rear Remote Valve Installation

Provided PFM and Remote Valve bracket replaces factory bracket. Utilize existing hardware and remote factory components as needed.

PFM is mounted utilizing common hardware located in PFM Hardware bag.

Rear Remote Valve is mounted using the three provided M8x1.25mm x 65mm bolts

The battery disconnect bracket, three relays and POE splitter are mounted on the forward side of the same bracket.

Battery Disconnect utilizes common hardware located in Disconnect Hardware bag and M8x1.25mm x 16mm bolts

Relays are mounted using provided M6x1mm x 10mm bolts

POE is mounted using common hardware located in POE Hardware bag.

The factory rear work light is relocated to the top of the bracket using the provided M8x1.25mm x 25mm bolt and nut.