


- Steering pump is located along the tractor frame inside the right rear tire.
- Hand steering pump located under the hood in front of the fire wall.
- Double Red Hose - Remove hardline from hydraulic pump, connect hose to the pump and P port of the Trimble STV (steering valve).
- Single Orange Hose - Connect to hardline removed from tractor steering pump and EF port on Trimble STV. 90 degree fitting goes between the hose and hardline.
- Single Green Hose - Connect to T-fitting coming off of Sabanto’s rear remote valve and T port of Trimble STV.
- Double Purple Hose - Disconnect factor hose on going to left side of steering cylinder, insert T-fitting, reconnect factor line to T-fitting, connect the T-fitting to the A port of Trimble STV.
- Single Purple Hose - Disconnect factory hose going to right side of steering cylinder, insert T-fitting, reconnect factor line to T-fitting, connect the T-fitting to the B port of Trimble STV.




