Skip to content
English
Submit Issue Sign in
vMC Sign in
  • There are no suggestions because the search field is empty.

Autoplay queued missions

Automatically play queued missions to reduce manual intervention

Autoplay allows the Sabanto Autonomy System to automatically begin the next mission in a vehicle's queue without operator intervention. When enabled, after each mission completes and the AV&L (Audio, Visual & Light) sequence runs, the system advances to the next queued mission on its own.

Requirement: An AV&L Kit must be installed on the vehicle to use Autoplay. If your vehicle doesn't have one, please contact sales.

Screenshot 2026-06-02 at 11.36.19 PM

 

How to Enable Autoplay

  1. Open Vehicle Mission Control (vMC) and select a vehicle.
  2. Open the Queue panel from the vehicle controls sidebar.
  3. Scroll to the Queue Settings section at the bottom of the panel.
  4. Toggle Autoplay on. A confirmation toast will appear: "Autoplay has been enabled — The Sabanto Autonomy System will automatically begin the next mission in the queue."

    autoplay-enabled
  5. When Autoplay is active, a spinning icon appears next to the Queue label in the vehicle's basic controls list.

    autoplay-queued

 

Assigning a Mission with Autoplay Enabled

When you assign a mission to a vehicle that has Autoplay turned on, a confirmation dialog will appear before the mission is saved:

"Autoplay is enabled. After the AV&L sequence completes, this mission will begin automatically. Are you sure you want to proceed?"

Select "Yes, continue" to confirm, or "Cancel" to go back.

Tip: Autoplay works best when it has been enabled before the first mission is assigned. Make sure Autoplay is enabled before planning field operations.

 

How to Disable Autoplay

  1. Open the Queue panel for the vehicle.
  2. Toggle Autoplay off in Queue Settings.A toast will confirm:

    "Autoplay has been disabled — An operator will be required to resume each mission in the queue."

 

Troubleshooting

Autoplay toggle is grayed out
The vehicle does not have an AV&L Kit installed. Contact sales to purchase and install one. A prompt with a contact sales link will appear in the Queue Settings panel.

Autoplay setting doesn't appear
The Autoplay feature flag is not enabled for your account. Contact Sabanto support.

Missions are not starting automatically
Check for active vehicle warnings in the controls panel. The AV&L sequence must complete without errors before the next mission can begin. Resolve any blocking warnings and confirm the vehicle is in a ready state.

A confirmation dialog appears every time I assign a mission
This is expected behavior. When Autoplay is enabled, vMC asks for confirmation each time you assign a mission to the queue. Select "Yes, continue" to proceed.